Epoxy floor paint has high strength, wear resistance, durability, penetration resistance, strong corrosion resistance to chemicals, and the overall seamless, easy to clean, do a good job in the daily maintenance and cleaning of epoxy floor paint, can effectively maintain the beauty of epoxy floor paint, and can extend the service life of epoxy floor paint. Daily maintenance and cleaning methods of epoxy floor paint:
1. Although epoxy floor paint has strong corrosion resistance to chemicals, the corrosive chemicals and solvents splashed on the epoxy floor paint should be cleaned up immediately to avoid damage to the epoxy floor paint.2、对于洒落在环氧漆上的油脂须立刻清理，否则会使地面变滑，易造成伤害。
2. The grease sprayed on the epoxy floor paint should be cleaned up immediately, otherwise it will make the ground slippery and easy to cause damage.
3. The epoxy floor paint can only withstand the temperature of 80 C. Therefore, steel plate or other high temperature resistant isolation pads should be laid on the epoxy floor paint for areas that often need welding or oxygen cutting.4、漆需经常性的定期维护清洁，这样既可以使漆保持美观清洁，也可以除去漆上可能存在的、会刮花漆膜的坚硬颗粒，避免环氧漆划伤。
4. Epoxy floor paint should be regularly maintained and cleaned, which can not only keep the epoxy floor paint beautiful and clean, but also remove the hard particles that may exist on the epoxy floor paint and scratch the paint film, so as to avoid scratches on the epoxy floor paint.5、车间内进行电焊等高温作业时，在电焊火花飞溅到的地方应用石棉布等耐火材料铺垫好，以防烧坏环氧涂层。
5. When high temperature operation such as welding is carried out in the workshop, asbestos cloth and other refractories are used to pave the place where welding sparks splash, so as to prevent burning down the epoxy floor coating.6、一旦环氧漆有损坏，及时使用涂料修补，以免油污通过损坏处渗入到水泥里，造成大面积涂料脱落。
6. Once the epoxy floor paint is damaged, timely use of paint repair, in order to avoid oil pollution through the damage into the cement, resulting in a large area of paint peeling off.
7. When cleaning large area of epoxy floor paint in workshop, do not use intensified chemical solvent (toluene, banana washing machine, you can use sawdust to sprinkle and then clean
8. When cleaning epoxy floor paint, please use soft mop or dry-wet dual-purpose vacuum cleaner. Clean with clean water or detergent, but pay attention to the wet and slippery ground.
9. Epoxy floor paint can be partly repaired if it is worn or scratched due to long use time. If the area is large, it is recommended to be re-rolled once.
10. In areas where epoxy floor paint is susceptible to contamination, corridors should be cleaned 1-2 times a day with wide cloth mops for prominent "facade" areas.
11. Epoxy floor paint can be waxed in time.
12. Employees should change their soft soles before entering the clean area. Plastic blankets should be installed at the junction where sand and mud are easily brought in and at the entrance and exit to facilitate the removal of sole debris when employees enter and exit.13、车辆、叉车、铲车运行时尽量避免刹车，卸货时注意货物平放，避免货物侧侄、拖拽刮伤地面。
13. Avoid braking when vehicles, forklifts and forklifts are running. Pay attention to placing cargo flat when unloading, and avoid cargo side nephews and dragging scratches on the ground.